- Buffer cylinder 50 l
- geothermal pump and heating pump
- domestic hot water diverter valve
- booster heater for heating backup

Application: market environment.
Convenience and efficiency through modernization with geothermal heat.
- buildings with old heating systems need to have their older heat pumps replaced
- cooling capacity does not always match the cooling capacity of the required heat pump
- requires drilling and provision of services

Application: project.
Convenience and efficiency through modernization with geothermal heat.
Single or two-family home with older heat pump.
Because of the building structure and the old central heating system, modernization that combines the existing heat source with a new heat pump is needed.

Application: requirements.
Convenience and efficiency through modernization with geothermal heat.
Requirements:
- futureproofing and efficiency
- convenience and comfort
- networking

System: Basic system.
Logatherm WSW196i(T) geothermal-water heat pump
- high level of efficiency with a SCOP* of up to 5.5
- modulating operating mode in four power settings from 6 to 16 kW
- low-noise operation, compact design for greater convenience
- also suitable for cooling operations when combined with accessory PKS9
Top-spec equipment included as standard:
Networking as standard:
- can be combined with photovoltaic system
- Integration of Buderus MyEnergyMaster planned
- Smart Grid ready for load management
- Internet interface integrated as standard
Logalux SH 290 R‑S DHW cylinder:
- particularly suitable for use in combination with Logatherm heat pumps
- corrosion protection system of enamel and magnesium anode
- heat protection from polyurethane rigid foam with foil cladding
- cylinders available in different capacities
HS25 heating circuit set:
- efficient operation
- electronically controlled power saving pump
- modular design

System
Expansion stage 1:
Passive cooling station PKS9
System: Expansion stage 1.
Cooling the rooms with passive cooling station.
- isolated housing in attractive design
- comfortable room temperature in summer
- can be connected from the top or the side

System: Expansion stage 1.
Electric fireplace feel the flame No. 1
- suspended, with atmospheric flame effect
- fully wired design (including remote control)
- 20 W power consumption with no heat output, can be switched to 1 kW or 2 kW heat output

System: Expansion stage 1.
Infrared heating and electric fireplace.
System benefit:
The generated current can be used directly. Infrared heating is an ideal complement to underfloor heating, as it increases the perceived room temperature and creates a pleasant feeling of warmth. Even without a chimney, electric fireplaces allow you to add extra comfort to your home with radiated heat.

System
Expansion stage 2:
Photovoltaic system.

System: Expansion stage 2.
Photovoltaic module Panel vision H 3.0 style
- glass/glass module with up to 370 Wp output
- 30-year product and performance guarantee
- 87 % rated output after 30 years
Battery storage system:
- Flexible and expandable capacity (5.1‑22.1 kWh net)
- Lithium-iron phosphate batteries with ceramic separators
- High storage capacity despite compact size
Hybrid inverter Fronius Symo GEN24:
- output power of 3–10 kW, three-phase
- 2 MPP trackers as standard
- system integration into Buderus MyEnergyMaster energy manager
- emergency power variant "PV Point" as standard

System: Expansion stage 2.
MyEnergyMaster app
- More independence with up to 70% self-generated supply
- Efficient networking of photovoltaics and heat pump
- Clearer overview of how much energy is being consumed where
System: Expansion stage 2.
Buderus Wallbox WLS11i
- Highest-quality wall box eligible for funding in a contemporary design for all Type 2 electric and hybrid cars
- Can be mounted in outdoor areas or in garages
- Vehicle electricity meter ensures that energy costs are reduced with a cheaper electricity tariff
- Available with either a 230 V or 400 V connection and charging capacity of up to 11 kW
- MyBuderus app provides a good overview and is simple to control
- Energy can be managed sustainably with a photovoltaic system, the Buderus Energy manager and the MyEnergyMaster app
System: Expansion stage 2.
Photovoltaic system.
System benefit:
The electricity generated by the PV system supplies the heat pump system and the electrical appliances in the house. The addition of a battery storage unit increases the proportion of on-site consumption and allows self-generated electricity to be available for use even when it’s not sunny.

System
Expansion stage 3:
Bosch Smart Home
System: Expansion stage 3.
Home automation Bosch Smart Home
- room/radiator thermostats controlled intuitively via smartphone
- additional optional control of smoke alarms, door contacts, roller shutters, etc.
- combines seamlessly with Buderus MyEnergyMaster energy master to increase the consumption of PV-generated power
Buderus room thermostat Smart Home:
The perfect addition to radiator thermostats that optimises heat regulation across the entire room.
- displays the current/requested room temperature and the relative humidity
- measures the temperature at the room thermostat and not on the radiator
- room temperature can be controlled on the machine itself
- controls up to six radiators
Buderus room thermostat for underfloor heating:
- increased thermal comfort thanks to connectivity with the Smart Home system
- targeted individual room regulation
- ready for the future: always up to date and can be upgraded
- bidirectional communication with the Buderus Logamatic system control unit in the heat generator
System: Expansion stage 3.
Home automation Bosch Smart Home
System benefit:
The Bosch Smart Home automation system enables the heating system to be intuitively monitored and operated from any location. Not only does this bring added convenience, it also offers potential for energy cost savings if used correctly.
Liquid to water heat pump Logatherm WSW196i-12T:
- high efficiency due to SCOP* of 5.5
- modulating operation (3 to 12 kW)
- low noise operation, compact design for greater convenience
* The SCOP is defined as the seasonal performance factor at four different external temperatures - weighted differently depending on climate zone. It replaces the previous COP rating.
Photovoltaic module Panel vision H 3.0 style:
- optimum cell protection with glass/glass technology
- glass/glass module with output of up to 370 Wp
- 30-year product and performance guarantee
- 87 % of rated output after 30 years
Battery storage system:
- flexible capacity, can be expanded
- lithium-iron-phosphate cells with ceramic separators
- high storage capacity in a small space
- output sizes 5.1–22.1 kWh
Hybrid inverter Fronius Symo GEN24:
- output power of 3–10 kW, three-phase
- 2 MPP trackers as standard
- consumes less than 4 W of selfgenerated energy
- can be integrated into Buderus MyEnergyMaster energy manager as standard
- emergency power variant "PV Point" as standard
Electric fireplace feel the flame No. 1:
- suspended, with atmospheric flame effect
- fully wired design (including remote control)
- 20 W power consumption with no heat output, can be switched to 1 kW or 2 kW heat output
- 6 models to choose from (matte black powder coated, acrylic glass: black, white, gray, orange, black Swarovski crystals)







Connectivity.
MyEnergyMaster app
- More independence with up to 70% self-generated supply
- Efficient networking of photovoltaics and heat pump
- Clearer overview of how much energy is being consumed where
Connectivity.
MyBuderus app
- app for flexible control of the heating and ventilation system
- the most important parameters at a glance
- Graphic illustration of energy consumption
- Overview of thermal solar yield

Connectivity.
ConnectPRO web portal
- direct networking with the customers's system
- fast fault detection and troubleshooting
- predictive resource and personnel planning
- function DIAGNOSTIC plus for analyzing the system behavior


Service.
ProDelivery app.
- transparent Germany-wide shipment tracking of Buderus deliveries and returns
- information on the delivery status directly in the app without having to contact the branch by phone
- considerable time savings, flexible and convenient operation due to clear layout
- large number of additional functions such as delivery history, PDF download of delivery note, parking approval, and much more.

Service.
Why geothermal?
Geothermal energy is the best heating source
- high quality, highly efficient, and unaffected by weather conditions
- in high demand, environmentally friendly, and sustainable
- invisible, quiet, and maintenance-free


Service.
Cooperation with: the geothermal drilling team.
Full potential geothermal heating requires correct implementation:
- heat pump, heat source, and building must be in tune with each other
- high grade planning and execution (geology, energy requirement, heat load, drilling simulation)
- straightforward process (planning process, subsidies, applications, organization)

Service.
Cooperation with: the geothermal drilling team.
Unique features of the drilling team:
- quote for service provided within 24 hours
- technical guidance and consultation free of charge
- professional drilling services available anywhere in Germany
Result:
- a problem-free all-inclusive geothermal service package for the customer


Service.
24/7 customer service.
- assistance with commissioning, maintenance, repair, water analysis and efficiency
- more than 300 service technicians are on call every day throughout Germany
- over 220 service products: available throughout Germany; can be combined as required
Service.
Warranties.
5-year system warranty:
- valid with the Buderus warranty certificate from an authorized contractor
- includes costs for materials and labor for 5 years from date of installation by the heating installation company
- convenient registration for system warranty via online form or toll-free hotline

Subsidy: Information.
Climate protection is worth it.
Renewable heating systems are being promoted as part of the climate package. This includes heat pumps, pellet stoves and solar thermal systems. Benefit from state subsidies and let us advise you.
Our free advice hotline:
0800 0 2030 00
Monday–Friday, 7 a.m. to 7 p.m.
www.buderus.de/staatliche-foerderung

Subsidy: febis funding service.
With febis for optimum funding.
- Customers interested in renewable heating systems receive straightforward advice from the subsidy professionals at febis
- Online service based on checklist and heating system quote
- Our own online information at
www.buderus.de/foerderservice-ek
and funding hotline on
+49 (0) 6190 9263 492*
The febis funding service for trade customers.
- Web-based funding service application especially for contractors
- Reduced work and research effort
- Customer acquisition and retention through a range of services in a multi-stage process
- Information service:
fachkunden.buderus.de/fachkunden-foerderservice
and funding hotline on
+49 (0) 6190 9263 431